P295GH Pressure Vessel Steel Plate

P295GH is a normalized pressure vessel steel to EN10028-2 with a minimum yield strength of 295 MPa. As with many of our other pressure vessel grades it is has excellent weldability.

Classification :

Boiler Pressure Vessel Steel

+86 13256132128

Alfred@ppgiyehui.com

E-mail

RELATED PRODUCTS

ONLINE MESSAGE

PRODUCT DETAILS

Product Introduction

A steel which is ideal for use in elevated working temperatures, grade P295GH is used in the fabrication of industrial pressure vessels and boilers. It is an EN10028 specified grade which governs steels used in pressurized service.

P295GH steel gives optimum performance for pressurized products that must support a creep limit greater than 155N/mm2 at 400ºC. It is a normalized steel and has excellent welding characteristics. It is used worldwide by fabricators serving the oil and gas industry and can be found in heat exchangers, weldable pressure vessels and boilers and pipework.

EN 10028
EN 10028 Part 2 & 3 is the euro norm specification for flat steel products intended for use in pressurized service. The specification covers non–alloy and alloys steels as well as weldable fine grain steels.
EN 10028 sets standards for steel used in weldable industrial boilers and pressure vessels. The specification has the same status of the old DIN and BS Standards which EN 10028 has now superseded.

offer EN 10028 specified boiler and pressure vessel quality steel from stock which is in most cases of China Origin – this is known for its superior quality. Our carbon steel plates come with mill certification and are stamped to provide full traceability. Alternatively, the customer can arrange testing via a third party testing house.

Technical Data

Chemical Composition of EN 10028 – P295GH

C	0.08 to 0.20	Cr	≤0.30
Si	≤0.40	Cu	≤0.30
Mn	0.90 to 1.50	Mo	≤0.08
P	0.025	Nb	≤0.020
S	0.015	Ni	≤0.30
Al	≤0.020	Ti	0.03
N	≤0.012	Vi	≤0.02

(Maximum values unless stated otherwise)

Mechanical Properties of EN 10028 – P295GH

Type	Thickness (mm)	Yield Strength MPa (min)	Tensile Strength MPa	Elongation % (min)	Impact Energy (KV J) (min)
Type	Thickness (mm)	Yield Strength MPa (min)	Tensile Strength MPa	Elongation % (min)	-20°	0°	+20°
Normalized	≤ 16	295	460 - 580	21	27	34	40
	16> to ≤40	290	460 - 580	21	27	34	40
	40> to ≤60	285	460 - 580	21	27	34	40
	60> to ≤100	260	460 - 580	21	27	34	40
	100> to ≤150	235	440 - 570	21	27	34	40
	150> to ≤250	220	430 - 570	21	27	34	40

(Minimum values unless stated otherwise)

Warehouse storage

Our products has been wildly sold to Northeast, North China, East China, Europe, Middle East, Southeast Asia, Australia and ect...Total area of our cooperation factory is approximately 58, 000 square meters, and registered capital is RMB 10 million Yuan, and fixed assets is RMB 50 million Yuan.

Packaging and shipping

The company specializes in selling steel, with best-selling products including PPGI, galvanized steel coil, steel plate, stainless steel plate, seamless welded steel pipe, aluminum coil, angle steel, H-shaped steel beam, and threaded steel. The product performance indicators have reached the advanced level in China. Our products have been widely sold to Northeast, North China, East China, Europe, the Middle East, Southeast Asia, Australia, etc

Customer communication

With the strategic thought of striving for survival on the basis of quality and development on the basis of benefit, adhering to management idea of "faith, practical, innovation, and development", we have courage to challenge, and keep continuous innovation in the competition.

Application area

We also do our unremitting efforts to fight bravely for creating a national brand and international brand. Holding to the intellectual businessman of style and the spirit of sincerity, all staff of our company are willing to cooperate and develop together with you.

COOPERATIVE PARTNER

FAQ

What ports of shipment are there?

A:Under normal circumstances, we ship from Shanghai, Tianjin, Qingdao, Ningbo ports, you can specify other ports according to your needs.

What product information do I need to provide?

A:Please kindly provide the grade, width, thickness, surface treatment requirement should you have and quantities you need to purchase.

Do you provide custom made Products service?

A: Yes,if you have your own design , we can produce according to your specification and drawing.

What about product prices information?

A:Prices various according to periodic price changes of raw materials.

Can you send samples?

A:Of course, we can provide customers with free samples and express shipping service to all over of the world.

It's my first time to import steel products, can you help me with it?

A:Sure,we have agent to arrange the shipment, we will do it together with you.

Boiler Pressure Vessel Steel