HOME
ABOUT US
PRODUCT CENTER
NEWS
CONTACT US

Home page

NM500 abrasion resistant steel plate

NM500 Wear resistant plate is bimetal composite wear resistant steel plate.wear-resistant steel plate
NM500 is extensively used in engineering equipment, mining machinery, coal mining equipment,
environmental protection equipment, metallurgical machinery, and other products.

Classification :

Wear Resistant Steel Plate

E-mail

PRODUCT DETAILS

Product introduction

GB/T24186 NM500 abrasion resistant steel plate is an abrasion resistant plate with a hardness of 500 HBW. intended for applications where demands are mposed on abrasion resistance in combination with good cold bending properties. GB/T24186 NM500 abrasion resistant steel plate offers very goodweldability.

GB/T24186 NM500 abrasion resistant steel plate is a high-strength wear-resisting steel plate, which has a high abrasion resistance. Brinell hardness value up to 500(HBW) is mainly used to provide protection for wear-resisting occasions or parts, so as to prolong the service life of the equipment, reduce the maintenance and stop caused by maintenance, and correspondingly reduce the investment of funds.

Specifications	GB/T24186 NM500 abrasion resistant steel plate
Standard	GB/T24186
Specialize	Shim Sheet, Perforated Sheet, B. Q. Profile.
Length	50mm-18000mm
Width	50mm-4020mm
Thickness	1.2mm-300mm
Hardness	Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.

Profiled: According to drawing.

Inspection: Chemical analysis, Metallographic, Mechnical analysis, Ultrasonic testing, Impact testing, Hardness testing, Surface quality and Dimension report.

MOQ: 1pcs.

Supplementary Technology: Brinell hardness, HBW according to EN ISO 6506-1, on a milled surface 0,5–2 mm below plate surface per heat and 40 tons. Tests are made for every variation of 15 mm in the thickness of plates from the same heat.

Technical data

NM500 is a high-strength wear-resistant steel, which has a high wear resistance, Brinell hardness value reaches 500 (HBW) mainly in the need to wear the occasion or location to provide protection to the equipment longer life, reduced maintenance brought maintenance and downtime, and the corresponding reduction of capital investments.

GB/T24186 NM500 abrasion resistant steel plate chemical composition

Brand	C	Si	Mn	P	S	Cr	Mo	Ni	B	CEV
NM360	≤0.17	≤0.50	≤1.5	≤0.025	≤0.015	≤0.70	≤0.40	≤0.50	≤0.005
NM400	≤0.24	≤0.50	≤1.6	≤0.025	≤0.015	0.4~0.8	0.2~0.5	0.2~0.5	≤0.005
NM450	≤0.26	≤0.70	≤1.60	≤0.025	≤0.015	≤1.50	≤0.05	≤1.0	≤0.004
NM500	≤0.38	≤0.70	≤1.70	≤0.020	≤0.010	≤1.20	≤0.65	≤1.0	Bt: 0.005-0.06	0.65

GB/T24186 NM500 abrasion resistant steel plate mechanical properties

Brand	Thickness mm	Tensile Test MPa			Hardness
		YS Rel MPa	TS Rm MPa	Elongation %
NM360	10-50	≥620	725-900	≥16	320-400
NM400	10-50	≥620	725-900	≥16	380-460
NM450	10-50	1250-1370	1330-1600	≥20	410-490
NM500	10-50	---	----	≥24	480-525

Processing Technique

Electric Furnace Steelmaking
LF Refining
VD Vacuum Treatment
Continuous casting and rolling
Accelerated Cooling
Thermal Treatment
Ware-house-in Inspection

Capacity: 3,000 ton per month.

Test: Chemical analysis, Metallographic, Mechnical analysis, Ultrasonic testing, Impact testing, Hardness testing, Surface quality and Dimension report.

Package

Bundle or piece.

Mill’s Test Certificate

Heat treatment: quenching and tempering (quenching and tempering).

NM500 wear-resistant steel is widely used construction machinery, mining machinery, mining machinery, environmental protection machinery, metallurgical machinery, abrasives, bearings and other product components.

Warehouse storage

Our products has been wildly sold to Northeast, North China, East China, Europe, Middle East, Southeast Asia, Australia and ect...Total area of our cooperation factory is approximately 58, 000 square meters, and registered capital is RMB 10 million Yuan, and fixed assets is RMB 50 million Yuan.

Packaging and shipping

The company specializes in selling steel, with best-selling products including PPGI, galvanized steel coil, steel plate, stainless steel plate, seamless welded steel pipe, aluminum coil, angle steel, H-shaped steel beam, and threaded steel. The product performance indicators have reached the advanced level in China. Our products have been widely sold to Northeast, North China, East China, Europe, the Middle East, Southeast Asia, Australia, etc

Customer communication

With the strategic thought of striving for survival on the basis of quality and development on the basis of benefit, adhering to management idea of "faith, practical, innovation, and development", we have courage to challenge, and keep continuous innovation in the competition.

Application area

We also do our unremitting efforts to fight bravely for creating a national brand and international brand. Holding to the intellectual businessman of style and the spirit of sincerity, all staff of our company are willing to cooperate and develop together with you.

COOPERATIVE PARTNER

FAQ

What ports of shipment are there?

A:Under normal circumstances, we ship from Shanghai, Tianjin, Qingdao, Ningbo ports, you can specify other ports according to your needs.

What product information do I need to provide?

A:Please kindly provide the grade, width, thickness, surface treatment requirement should you have and quantities you need to purchase.

Do you provide custom made Products service?

A: Yes,if you have your own design , we can produce according to your specification and drawing.

What about product prices information?

A:Prices various according to periodic price changes of raw materials.

Can you send samples?

A:Of course, we can provide customers with free samples and express shipping service to all over of the world.

It's my first time to import steel products, can you help me with it?

A:Sure,we have agent to arrange the shipment, we will do it together with you.

Wear Resistant Steel Plate