Hardox 400 500 Steel Plate

Hardox wear plate is the world's leading abrasion-resistant (AR) steel.
Hardox is hard through and through, from the surface deep down to its core,
giving you extended service life and high productivity in the most challenging environments.

Classification :

Wear Resistant Steel Plate

+86 13256132128

Alfred@ppgiyehui.com

E-mail

RELATED PRODUCTS

ONLINE MESSAGE

PRODUCT DETAILS

Product introduction

Hardox 400 is an abrasion resistant steel with a nominal hardness of 400 HBW. Typical applications are components and structures subject to wear
Chemical Composition of Hardox 400 Wear Abrasion Resistant Sheet Plates

Technical data

Chemical Composition of Hardox 400 Wear Abrasion Resistant Sheet Plates

Plate	C	Si	Mn	P	S	Cr	Ni	Mo	B	CEV	CET
thickness mm	max %	max %	max %	max %	max %	max %	max %	max %	max %	typv	typv
3-(8)	0.15	0.7	1.6	0.025	0.01	0.3	0.25	0.25	0.004	0.33	0.23
08/20/13	0.15	0.7	1.6	0.025	0.01	0.5	0.25	0.25	0.004	0.37	0.27
(20)-32	0.18	0.7	1.6	0.025	0.01	1	0.25	0.25	0.004	0.48	0.29
(32)-45	0.22	0.7	1.6	0.025	0.01	1.4	0.5	0.6	0.004	0.57	0.31
(45)-51	0.22	0.7	1.6	0.025	0.01	1.4	0.5	0.6	0.004	0.57	0.38
(51)-80	0.27	0.7	1.6	0.025	0.01	1.4	1	0.6	0.004	0.65	0.41
(80)-130	0.32	0.7	1.6	0.025	0.01	1.4	1.5	0.6	0.004	0.73

Mechanical Properties of Hardox 400 Wear Abrasion Resistant Sheet Plates

Grade	Mechanical Property			Charpy V Impact Test
HADOX 400	Yield	Tensile	Elongation	Degree	longitudinal
	Min Mpa	Mpa	Min %	-40	J
	1000	1250	10	-40	45

Hardox 450 is an abrasion-resistant steel with a nominal hardness of 450 HBW. Hardox 450 combines good bendability and weldability with an option for guaranteed impact toughness (Hardox 450 Tuf). The products can be used in many different components and structures that are subject to wear.
Chemical Properties Of hardox 450 Plate

HARDOX 450 Chemical Compositiom
Plate	C	Si	Mn	P	S	Cr	Ni	Mo	B	CEV	CET
thickness mm	max %	max %	max %	max %	max %	max %	max %	max %	max %	typv	typv
3-（8）	0.19	0.7	1.6	0.025	0.01	0.25	0.25	0.25	0.004	0.41	0.30
8-20	0.21	0.7	1.6	0.025	0.01	0.50	0.25	0.25	0.004	0.47	0.34
（20）-40	0.23	0.7	1.6	0.025	0.01	1.00	0.25	0.25	0.004	0.57	0.37
（40）-50	0.23	0.7	1.6	0.025	0.01	1.40	0.25	0.60	0.004	0.59	0.36
（50）-80	0.26	0.7	1.6	0.025	0.01	1.40	1.00	0.60	0.004	0.72	0.41

Plate thickness below 4 mm only after special agreement
CEV = C+Mn/6+(Cr+Mo+V)/5+(Cu+Ni)/15
CET = C + （Mn+Mo）/10+( Cr+ Cu)/20+ Ni/40

Mechanical Properties Of hardox 450 Plate

Mechanical properties of HARDOX 450
Grade	Mechanical Property			Charpy V Impact Test
HADOX 450	Yield	Tensile	Elongation	Degree	longitudinal
	Min Mpa	Mpa	Min %	-40	J
	1200	1400	10	-40	40

Hardox 500 is a bendable and weldable abrasion-resistant steel at a nominal hardness of 500 HBW. Suitable for applications that demand higher wear resistance. Hardox 500 is a bendable and weldable abrasion-resistant steel, with a nominal hardness of 500 HBW. Suitable for applications that demand higher wear resistance.
HARDOX500 Chemical Composition

Plate	C	Si	Mn	P	S	Cr	Ni	Mo	B	CEV	CET
thickness mm	max %	max %	max %	max %	max %	max %	max %	max %	max %	typv	typv
04/13/13	0.27	0.7	1.6	0.025	0.01	1	0.25	0.25	0.004	0.49	0.34
(13)-32	0.29	0.7	1.6	0.025	0.01	1	0.5	0.3	0.004	0.62	0.41
(32)-40	0.29	0.7	1.6	0.025	0.01	1	1	0.6	0.004	0.64	0.43
(40)-80	0.3	0.7	1.6	0.025	0.01	1.5	1.5	0.6	0.004	0.74

Mechanical Property HARDOX 500

Grade	Mechanical Property			Charpy V Impact Test
HADOX 500	HBW Thickness/Mpa		Elongation	Degree	longitudinal
	4-32MM	470-530	Min %	-40	J
	(32)-80	450-540	10	-40	40

Warehouse storage

Our products has been wildly sold to Northeast, North China, East China, Europe, Middle East, Southeast Asia, Australia and ect...Total area of our cooperation factory is approximately 58, 000 square meters, and registered capital is RMB 10 million Yuan, and fixed assets is RMB 50 million Yuan.

Packaging and shipping

The company specializes in selling steel, with best-selling products including PPGI, galvanized steel coil, steel plate, stainless steel plate, seamless welded steel pipe, aluminum coil, angle steel, H-shaped steel beam, and threaded steel. The product performance indicators have reached the advanced level in China. Our products have been widely sold to Northeast, North China, East China, Europe, the Middle East, Southeast Asia, Australia, etc

Customer communication

With the strategic thought of striving for survival on the basis of quality and development on the basis of benefit, adhering to management idea of "faith, practical, innovation, and development", we have courage to challenge, and keep continuous innovation in the competition.

Application area

We also do our unremitting efforts to fight bravely for creating a national brand and international brand. Holding to the intellectual businessman of style and the spirit of sincerity, all staff of our company are willing to cooperate and develop together with you.

COOPERATIVE PARTNER

FAQ

What ports of shipment are there?

A:Under normal circumstances, we ship from Shanghai, Tianjin, Qingdao, Ningbo ports, you can specify other ports according to your needs.

What product information do I need to provide?

A:Please kindly provide the grade, width, thickness, surface treatment requirement should you have and quantities you need to purchase.

Do you provide custom made Products service?

A: Yes,if you have your own design , we can produce according to your specification and drawing.

What about product prices information?

A:Prices various according to periodic price changes of raw materials.

Can you send samples?

A:Of course, we can provide customers with free samples and express shipping service to all over of the world.

It's my first time to import steel products, can you help me with it?

A:Sure,we have agent to arrange the shipment, we will do it together with you.

Wear Resistant Steel Plate